Filter
Top Products
- 58 -
INITIALIZE
RETURNING TO DEFAULT ?
THIS OPERATION CANNOT BE CANCELED.
NO YES
Initializing6-7
All settings can be restored to their condition at the time of purchase.
1. Recorded pictures are erased and settings are reset.
2. Pre-set functions are not reset.
Settings reset with "Restor default setting"
* are initial settings.
Setting name Description
DATE/TIME JAN/01/2011 00 : 00
LANGUAGE ENG FRA DEU ITA NED ESP
ENTRANCE CALL TONE
1 • 2 • 3 • 4 • 5
DOOR CALL TONE
1 • 2 • 3 • 4 • 5
GUARD CALL TONE 1 • 2 • 3 • 4 • 5
DOCTOR CALL
ENABLE DISABLE
PRESS TO TALK
ENABLE DISABLE
PICTURE MEMORY Pictures
All saved pictures are erased.
Screen
• Zoom X 6
• Wide X 6
• Zoom X 3, Wide X 3
• Wide X 3, Zoom X 3
CALL DURATION
30 sec. • 45 sec. • 60 sec. • 90 sec. • 120 sec.
NIGHT ILLUMINATION
ENABLE • DISABLE
ALARM INPUT
DISABLE • N/O • N/C
EXTERNAL INPUT (S1 to S3)
DISABLE • UTILITY • SECURITY
UTILITY-SENSOR Detection N/O • N/C
Alarm timer
10 sec. • 1 min. • 10 min. • 1HOUR • CONT
SECURITY-SENSOR Detection
N/O • N/C
Alarm timer
10 sec. • 1 min. • 10 min. • 1HOUR • CONT
Alarm Transfer
ENABLE • DISABLE
DEPARTURE TIMER SETTING
0 sec. • 30 sec. • 60 sec. • 120 sec. • 300 sec. •
600 sec.
ARRIVAL TIMER SETTING 0 sec. • 30 sec. • 60 sec. • 120 sec. • 300 sec. •
600 sec.
SECURITY PIN
S • X • T • W
RESET SETTING
ENABLE • DISABLE
GUARD (GUARD 1 to 4)
GUARD • RECEPTION • CONCIERGE • NOT
DISPLAYED
1 After performing steps 1 in section 6-1, select "INITIALIZE"
in the "INSTALLATION" screen and press the [ MENU]
button.
2 Press the [ MENU] button in the "INITIALIZE" screen to
perform initialization. Press the [ REC/PLAY] button to
cancel initialization and return to the previous screen.
3 The status LED and tone off LED light up during initialization.
The screen goes out when initialization is complete. (The sta-
tus LED blinks.)
TECHNICAL PRECAUTIONS
• Operating temperature: Entrance station: -10 to +60 (+14 °F to +140 °F)
Residential station: 0 to +40 (+32 °F to +104 °F)
Security guard station: 0 to +40 (+32 °F to +104 °F)
Control unit: 0 to +40 (+32 °F to +104 °F)
• Mounting location: Do not install the entrance station in a place where there would be a bright light behind a visitor (or where there would be
a bright background) or in a place where the camera lens would be directly exposed to sunlight or a bright light.
Entrance stations (integrated type) include a people sensor. Do not places objects such as plants or trees in places moni-
tored by the sensor.
Also, placing the unit in very bright sunlit areas may prevent the sensor from working properly.
• Rain hood (option): Although the entrance station is weather resistant, it is recommended that it not be directly exposed to weather conditions.
The rain hood can be installed to protect the entrance station from rainfall.
• Post-replacement setup: After all wiring is completed and the residential station has been replaced, turn off the power to the GT-BC temporarily
and then turn it back on.
Next, reprogram the relevant residential station.
• Cleaning: Clean the units with a soft cloth dampened with a neutral household cleanser. Do not use any abrasive cleaner or cloth.
The sensitivity of the sensor on an entrance station (Integrated type) will be reduced if it is dirty. Periodically perform
cleaning.
• Repair requests: When units do not operate properly, request a qualified technician for repairs.
7
TECHNICAL PRECAUTIONS