Filter
Top Products
47
Settings
47
English
You can choose the language in which all messages will be
shown on the display.
1 - Press the Funct interactive key.
2- Press the Program interactive key.
The display shows «WHAT DO YOU WANT TO PROGRAM?».
3- Press the Lang. interactive key.
The display shows the first available languages.
4 - Press the interactive key corresponding to your choose (e.g.:
English).
All messages shown by the display are in the same language.
Choosing the set and
system message
languages:
Lang.
English
Setting the display contrast
You can adjust the display contrast (8 levels).
Note: accessing the contrast setting using interactive keys is inoperative and may not be used.
1- Press .
The display shows « RING».
2- Press .
The display shows « DISPLAY».
3 - Press
.
The display indicates the contrast setting.
4- Consecutively press keys or to adjust display contrast.
Each time the key is pressed, the contrast changes and the
display indicates the new level.
5 - Press to confirm the setting.
DISPLAY
4 - Press the interactive key corresponding to your choose
(e.g.: English).
The display goes to idle mode.
Funct.
Program