Filter
Top Products
The multiline function
44
If another correspondent initiates a call on the second line, you
will hear a beep and the lamp of a second key will flash.
- Press the programmed key associated with the blinking lamp.
You will be connected to the second caller.
The key lamp lights up and the display shows the identity of the
correspondent on the other end of the line.
The first correspondent will be placed on hold.
The lamp associated with this key flashes.
Answering a
second call:
Communicating with the multiline function when attendant console
enabled
When a call arrives on your set programmed in multiline mode,
the lamp associated with the customized key blinks.
Caution : the set doesn’t ring.
- Press this programmed key to talk to the caller.
The lamp associated with the key switches to steady
illumination. The display presents the caller's identity.
Answering a call:
Suppose you are talking to one correspondent and another
correspondent is on hold.
- Press the programmed key associated with the flashing lamp.
The key lamp lights up and the display shows the identity of the
correspondent on the other end of the line.
The lamp associated with this key flashes.
Switching from one
correspondent to
another:
Communicating with the multiline function when attendant console
disabled
When a call arrives on your set programmed in multiline mode,
the set rings and the lamp associated with the customized key
blinks.
- Press this programmed key to talk to the caller.
The lamp associated with the key switches to steady
illumination. The display presents the caller's identity
Answering a call:
KEY 1
KEY 1
KEY 2
KEY 2
KEY 1
KEY 2
KEY 1
KEY 1
KEY 1