Filter
Top Products
38
The programmable keys
38
Identifying programmed keys
The paper label enables you to mark the names of correspondents
or functions programmed on each group of 10 keys.
Caution: use the specific attendant label; the name of
programmed user keys are printed.
1 - Remove the transparent cover over the label, by lifting
the bottom of the label (insert a pointed object into each notch
one after the other).
2 - Write the name of the programmed correspondent or
function on the label, next to the key.
3 - Refit the transparent cover in position.
PE2:02 PE1:00 INT:01 TL:00
Comm Status Funct. More
CCO1
OVERLOAD
CCO6
CCO5
RESERVED
LINES
ON :/OFF
PUBLIC
EXCHANGE 1
TIE LINES
CCO2
CCO3
CCO4
MAJOR
ALARM
SERVICES
LINES
Assistant
Show room
Shop
PUBLIC
EXCHANGE 2
Label
<- Start
- Press the Modify interactive key and resume programming
as explained above, in order to modify the programming
displayed.
- Press the <- Start interactive key to resume at the beginning,
in order to program another key.
- Press the End interactive key to exit programming mode.
Reminder: during programming,
- pressing the red key aborts the setting in progress;
- two keystrokes on the red key terminates
the programming sequence.
End
Modify