Filter
Top Products
Settings
46
Settings
This setting is used to choose the language in which internal
messages of the set are displayed.
1- Press .
The display shows « RING».
2- Press the key until the display shows
« LANGUAGE».
3- Press .
The display shows the first available languages.
. Press the --
>
interactive key to display the other languages, if
necessary.
4 - Press the interactive key corresponding to your choose (e.g.:
English).
Two beeps are emitted to confirm the language setting.
Depending on the choice, the display presents system
information in the selected language.
Choosing the display language
Messages broadcast by the display are from two sources: messages from the set and messages
specific to the associated system.
If your set is installed with a recent version system, you have access to only one menu.
The language synchronization is supplied automatically by the system.
Otherwise, a specific menu will let you choose the language in which messages from the set
are displayed.
Choosing the set internal
message language:
Lang.
To choose the language in which messages from the system are
shown:
1 - Press the Funct interactive key.
2- Press the Program interactive key.
The display shows «WHAT DO YOU WANT TO PROGRAM?».
3- Press the Lang. interactive key.
The display shows the first available languages.
Choosing the system
message language:
CHOOSE DISPLAY LANGUAGE:
Français English Deutsch Nederl. --->
English
--->
Funct.
Program