Filter
Top Products
26
For example, you may want the light to remind you that you have turned Call Forwarding
on. To do this, use one key to turn the indicator light on when you activate the feature. Use
the second key to turn the indicator light off when you deactivate that same feature. The
following procedure shows you how to program a FeatureLight On and Off key.
Using FeatureLight keys
To save a FeatureLight On key: To save a FeatureLight Off key:
1. Press
ß. 1. Press ß.
2. Do NOT select a memory key yet.
To program the light on, press
⁄.
2. Do NOT select a memory key yet.
To program the light off, press ‚.
3. Press the desired memory key. 3. Press the desired memory key.
4. Enter the telephone company feature
code for turning the feature on.
†
†
Note: Contact your telephone company for the appropriate feature codes.
4. Enter the telephone company feature
code for turning the feature off.
†
Read the display to confirm the number. Read the display to confirm the number.
5. Press
ß. 5. Press ß.
6. Label the memory key.
(See the diagram on page 23.)
6. Label the memory key.
(See the diagram on page 23.)
To turn a feature and light on or off:
1. Press the memory key where you stored the FeatureLight.
The display shows
FeatureLight ON or FeatureLight OFF.
2. Lift the handset or press either
©, ∂, or ¬.
The feature and light turn on or off. (When the feature and light are on and you’re not
using the telephone, the display shows
Feature ON and the line that it applies to as a
reminder.)
P0844339 04 E UG 9417CW Page 26 Thursday, April 20, 2000 11:09 AM