Filter
Top Products
Supplementary features
27
■
Starting an Announcement
You want to address internal subscribers directly via their loudspeaker – where available – ,
without waiting for a reply (similar principle to that of an intercom system).
Requirement: It is essential that the internal subscriber has not barred his phone against
announcement (for configuration see the Chapter "Protect against Do not disturb/Call waiting/
Intrusion/Announcement/Forward", 59).
Reject
Rejecting the call:
Press Foxkey Reject or End key.
➞
You remain connected with your first call partner. The call-waiting party
hears the busy tone.
Exit
Ending a current call:
Press the End Foxkey.
➞
1. The first call is terminated. You are now connected with the party who ini-
tiated the call waiting.
Pick up the handset.
Announcement
Press the Announcement Foxkey.
<Destination>
Select destination (Subscriber or Group) and confirm Ok with the Foxkey.
<Phone number>
Enter the phone number and confirm with the Ok Foxkey.
➞
Subscriber is made aware of the announcement by an acoustic signal. The
display reads Announcement: You can now talk.
Note:
You can also search in the phone book, last-number redial list or call list for the
phone number of the person you are looking for.
Or:
• Press the Menu Foxkey.
• Scroll to Call features and press the Select Foxkey.
• Press Announcement, select destination, and confirm Ok with the Foxkey.
➞
The display shows the number of the phone from which you last picked
up a call.
• Confirm Ok with the Foxkey or pick up the handset.
➞
Subscriber is made aware of the announcement by an acoustic signal. The
display reads Announcement: You can now talk.
☛
eud-0830_en.book Page 27 Wednesday, January 24, 2007 2:00 PM