Filter
Top Products
Using the Display and Operating Elements
14
Display
■
Display symbols and display text
New events such as a call in your absence, a new message or activated functions (e.g. Forward-
ing) are signalled on the display in the idle state by a symbol or a display text. You can then use
the relevant Foxkey to call up the information.
Keys
■
Pressing a Key
A key may have various functions depending on the situation and the operating mode. The
function activated depends on the number of times the key is pressed or whether it is pressed
quickly or held down for a moment. Here are some examples:
■
Using the Foxkey
The Foxkey has variable functions. These functions are displayed above the key.
Several contacts are stored under the broad Foxkey, which means you need to press the Foxkey
precisely under the function you want.
>>
If more Foxkeys are available:
Press the >> Foxkey.
Retrieving detailed information:
Press the right navigation key.
Function activated:
The activated function or selected setting is indicated by a check mark.
End
Deleting the display text:
Press the End Foxkey.
➞
The display returns to the idle state; the function remains activated.
Press the Foxkey.
<long>
Keep the Foxkey held down for a moment (about 2 seconds).
<2x short>
Press the key twice in quick succession.
Press the Foxkey under the position where the display shows the function you
want.
eud-0830_en.book Page 14 Wednesday, January 24, 2007 2:00 PM