Filter
Top Products
Chapter 1 Page 7
Note: If necessary, adjust the contrast control located on the side
of the Palm III organizer, so the alignment screen is clear
and readable.
2. Remove the stylus from its storage slot on the back of the Palm III
organizer.
3. Tap the exact center of each target that appears on the screen with
the tip of the stylus.
After you tap each of the targets, continue with the following sections
to set the time and date.
About the Backlight Feature
If you have difficulty seeing the information on your Palm III
organizer, you can use the backlight feature to illuminate your screen.
Note: If you upgraded your Pilot 1000 or Pilot 5000 organizer with
the 2MB memory card, the backlight feature is not available. In
this case, only the operating system and applications are
upgraded. To obtain the backlight feature, you must purchase
a PalmPilot
™
Professional or Palm III organizer.
To activate the backlight feature:
■ Press the green power button and hold it down for about two
seconds. Release the button when the backlight turns on.
To turn off the backlight feature:
■ Press and hold the green power button for about two seconds. The
backlight feature also turns off automatically (after a period of
inactivity) with the Auto-off after feature.
In addition, you can use a full-screen pen stroke to activate the
backlight feature. See “Buttons Preferences” in the Applications
Handbook for the Palm III Organizer for more information.