RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide50
Table 22 Shelf configuration menu parameters
Status item Description
Shelf Address Primary/Secondary Address
Active Settings
Current IP address of chassis shelf manager
New Settings
This field is used to assign a new IP address for the chassis shelf manager.
User must hit “submit” to update the value.
Blade 1 Configuration IPMB-Address (Hex) for ATCA-S201
Active Settings
Slot number and Hex address code corresponds to the physical slot
where the ATCA-S201 blade is installed. The value is self-discovered,
where Slot0=0x82, Slot1=0x84 … Slot13=0x9C, Slot14=9E
Blade 2 Configuration IPMB-Address (Hex) for slave expansion blade
Active Settings
The ATCA-S201A may be paired with companion blade to add additional
hardware resources such as additional hard drives Supported companion
blades include the Emerson ATCA1020 JBOD and ATCA1010 PCIe
expansion blades. This Hex address code corresponds to the physical slot
where the companion blade is installed. Slot0=0x82, Slot1=0x84 …
Slot13=0x9C, Slot14=9E.
New Settings
This field is used to assign a slot address for the blade. User must hit
“submit” to update the value.
4.10 I/O Status attributes
The items in this menu provide real-time information about the I/O activity occurring on physical
disks connected to the ATCA-S201 raid controller. Disks may reside in any of the four AMC slots,
RTM, or expansion JBOD products. Disks are identified by the Linux device designation /dev/sdx,
highlighted in gray.
Maintenance
Network
Shelf
I/O Status
CPU Status
ATCA Status
‐
StorBlade99 ATCA-S201 IO Status Page
/dev/sda Current I/Os / sec Current MBytes / sec Total MBytes
Read
100
20MB/s 34349568MB
Write
100
0MB/s 34101760MB
Total
100
20MB/s 68451328MB
/dev/sdb Current I/Os / sec Current MBytes / sec Total MBytes
Read
100
20MB/s 34039808MB
Write
100
0MB/s 34112000MB
Total
100
20MB/s 68151808MB
Figure 12 HTML tool, Emerson ATCA-S201 MaintenanceIO Status
