RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide96
Export system configuration file using CLI
The following procedure is a detailed description of the CLI-based export system
configuration procedure.
Step 4. On your remote host, open a secure ftp connection.
sftp admin@192.168.100.100
Step 5. Set binary mode and copy file
bin
get /backup/nvdisk.tar.gz
9.1.2 Import (restore) a blade configuration
The following procedure is a detailed description of the web-based import system
configuration procedure.
Import System configuration using web-GUI tool
Step 6.
Navigate to the Maintenance menu. Click the ‘Browse’ button, navigate to
find the new *.gz firmware file.
Step 7. Click the ‘Import’ configuration button.
Step 8. A popup will confirm successful import.
Import System configuration using CLI
Step 9.
Open a secure ftp connection. (Note: Substitute the proper IP address)
sftp admin@192.168.100.100
Step 10. Change remote directory
cd /dev/shm
Step 11. Set binary mode and copy file
bin
put nvdisk.tar.gz
exit
Step 12. Open a secure remote shell. (Note: Substitute the proper IP
address)
ssh –l admin 192.168.100.100
Step 13. Un-tar the config file
tar –C / –xvf /dev/shm/nvdisk.tar.gz
9.2 ATCA Firmware
All firmware code is stored in a single EEPROM flash device located on the carrier
blade. The ATCA-S201 flash device is partitioned into regions containing the
following code functions:
U-boot
Linux Kernel (kernel)
Root file system and storage applications (rfs)
Non-Volatile blade configuration Data (NVDATA)
