RTM-ATCA-SXXX Overview
6806800H62B ATCA‐S201InstallationandUseGuide108
Table 41 Connector Port Identification and Location
1 AMC Slot 0 7 Zone 3, J32 RTM signal connector
2 AMC Slot 1 8 Zone 3, J33 RTM signal connector
3 AMC Slot 2 9 Zone 2, J23 Chassis connector
4 AMC Slot 3 10 Zone 1, J10 Power supply connector
5 SODIMM, DDR2 socket 11 Power supply mezzanine module
6 Zone 3, J30 RTM power connector
Figure 31 ATCA-S201 ATCA Module Connectors
10.2.1 AMC Module Slots
The ATCA-S201 can accept up to four mid-height single width AMC modules. Each
slot is routed with PCI Express (AMC.1) and storage (AMC.3) signaling.
AMC.1 SAS/SATA
Channel 2 of the AMC slots is allocated for SAS signaling. All four AMC are connected
to the SAS Controller located on the ATCA carrier.
Channel 3 of the AMC slots is allocated for SAS signaling. A manufacturing option is
available to provide ONE of the following configurations:
Port 3 is routed to the on board SAS Controller.
Port 3 is routed to the Zone 3 RTM connector.
