Filter
Top Products
9
1. Choose a spot near an electrical
outlet and a telephone jack. Your
phone requires a modular telephone
jack and a standard electrical outlet
(120v AC). The power cord is six feet
long; make sure there is an electrical
outlet within reach of the base. The
outlet should not be controlled by a
wall switch. If the switch is ever turned
off, the phone will not operate.
2. Position the wall mount adapter on
the base. Line up the tabs on the wall
mount adapter with the holes on the
bottom of the base. Snap the wall
mount adapter firmly in place.
3. Mount the base on the wall.
Position the base so the mounting
studs will fit into the holes on the
bottom of the base. Position the
power cord to extend down the wall
the phone is to be mounted on. Slide
the base down on the mounting
studs until it locks into place.
WALL MOUNTING
4. Connect the telephone cord. The
telephone line cord has a snap-in
plug at each end. Insert one of the
plugs into the jack on the bottom of
the base. Insert the other end of the
plug into the wall jack.
5. Connect the power cord. Plug the
DC connector into the DC jack at the
rear of the base unit. Plug the AC
power adapter into an electrical
outlet.
wallboard
wooden
stud