Filter
Top Products
22
REC/MEMO KEY
MAILBOX X
(1,2&3 ) KEY
MENU KEY
SELECT KEY
Default ITAD Settings
The ITAD is preset to have the following
default settings:
Security Code: 19
Audible Message Alert: OFF
Date & Time: Mon 12:00am
Rings to answer: 4
ITAD Programming Overview
Setup order for the ITAD is:
1.Set Outgoing Message.
2.Set Security Code
3.Set Day and Time
4.Set Audible Message Alert
5.Set Announce Only
6.Set Base Ringer
7.Set Number of Rings
During ITAD setup, the 7 segment “--”
LED will flash. If no key is pressed for
20 seconds, the ITAD will beep and exit
program mode. You can also exit
program mode at any time by pressing
any MAILBOX key.
Selecting Announcement
There are 2 choices of announcements:
Normal outgoing message & Outgoing
message for announce only. To record
the proper announcement, you should
enter to the corresponding answering
mode.
1. Normal answering mode.
In this mode, the caller is able to leave
his message. If no announcement is
recorded, the default announcement
“
Hello, I’m unable to answer your call
right now. Please leave your name, num-
ber and message after the tone.
” will be
used. (see Recording the OGM).
2. Announce Only mode
If this mode is set, the caller is not able
to leave his message. If no announce-
ment is recorded, the factory default
greeting is: “
Hello, I’m unable to answer
your call right now. Please call again.
Thank you.
” will be used. (see Record-
ing the OGM)
Example for OGM1 (for multi - user
application):
“
Hi! We can’t come to the phone right
now. If you have a message for John
press
*
1 (Star, 1), for Jane press
*
2 (Star,
2), for Jack press
*
3 (Star, 3). If you have
a message for any one of us, just stay
on the line and record after the beep.
Thank you.
”
Example for OGM2 (announce only):
“
Hi! You have reached Jack and Jill. We
will be back after 1 p.m. Please call back
then. Thank you.
”
Recording/Playing/Deleting the
Outgoing Messages (OGM)
1. Press MENU key until the desired item
(Set Outgoing Message) is
announced.
2. Press REC/MEMO. “Now recording”,
is announced, followed by a beep.
Speak in the direction of the ITAD (
max. length: 90 seconds).
3. Press MAILBOX X to stop the record-
ing.
ITAD OPERATION