Filter
Top Products
26
DELETE KEY
mailbox. Then the system will play
only the new messages.
• In the absence of new messages, the
system will announce “
Mailbox X, You
have X old messages
” and then
playback the old messages.
• The and keys can be used
to skip forward and backward during
message playback.
• To stop message playback, and
return to normal operation mode,
press MAILBOX X and a long beep
is followed.
• The day and time stamp is announced
after each message is played.
• After all messages and memos have
been played, the final voice prompt
will be, “End of messages”, and the
ITAD will exit playback mode.
• Note that the system will play the
message based on “First-In-First-Out”
• If the system has less than 5 minutes
recording time left, it will announce the
remaining recording time to alert the
user.
• During message playback, the display
will be flashing to indicate that the
currently playing message is a new
message.
Saving Messages
• The ITAD will automatically save your
messages if you do not delete them.
The messages will be retained even
after power failure.
• The system can record up to 15
minutes of messages.
Deleting Messages
• Press DELETE key at any time during
message playback to delete the
current message.
• All reviewed messages for a
particular mailbox, can be deleted by
pressing and holding the DELETE key
for more than 2 seconds. The sys-
tem will announce “
Please select
mailbox
”.
• Press the “Mailbox X “key that you
want to delete all the reviewed mes-
sages in the selected mailbox.
Note: The DELETE function will only
delete old or reviewed messages. New
messages CANNOT be deleted until
they are reviewed.
Turning the ITAD ON/OFF
• If you want the ITAD to answer calls,
press ANSWER ON/OFF key. The ON
LED will then be turned on and “Answer-
ing machine on” will be announced.
• If you don’t want the ITAD to answer
calls, press ANSWER ON/OFF key.
The ON LED will then be turned off
and “Answering machine off” will be
announced.
ITAD OPERATION
ANSWER ON/OFF KEY