Filter
Top Products
28
REPEAT/SLOW KEY
SKIP/QUICK KEY
Changing Playback Speed
During playback, you can change the
playback speed by simply holding down
(SLOW) or (QUICK) to
the desired speed during playback.
There are 3 playback speeds. The
default speed is normal. Playback speed
will return to normal once you exit the
playback mode.
Auto Disconnect for Extension
Phone Pick-up
The ITAD will auto-disconnect the
telephone line if an extension phone or the
cordless handset accesses the line.
Note: If the ITAD continues to record
after an extension phone or the cordless
handset accesses the line, either press
MAILBOX X on the base or press “*,
0”on the extension phone or cordless
handset.
Memory Full
• When the ITAD has less than 30
seconds recording time remaining or
the total message count is equal to
99, the display shows “F” with the
number of new messages to indicate
memory full.
• If the ITAD memory is full, it will auto-
matically default to ANSWER OFF
mode. The ITAD will answer a call
after 10 rings and “Memory full;
ITAD OPERATION
Please enter your security code” is
announced. You may enter remote
operation mode by entering the se-
curity code.
• If memory is full, any attempt to record
memos or OGM’s will be inhibited.
Power Failure
• After a power failure, “CL” will flash to
notify you to set the day and time.
• All the messages, OGM’s and menu
settings (other than day and time) will
be retained.
• The ITAD will default to ANSWER ON
and Call Screening ON.
• Note that after power up, the ITAD will
have an initialization period, during
which, the display will flash with “--”.
During this period, you can still use
the cordless phone.
MEMORY FULL
POWER FAILURE