Filter
Top Products
27
• The display will still show the
number of new messages.
• Even if the ITAD is set to OFF, it will still
answer calls after 10 rings. An an-
nouncement, “
Please enter your se-
curity code
” is given, and you can en-
ter your security code to use remote
operation. (See Remote Operation of
ITAD)
Call Screening
Call screening level can be changed at
any time, even while the ITAD is
answering a call.
When the ITAD answers a call, the
speaker will monitor the voice on the line.
If you want to answer the call at once,
just pick-up the handset, or an exten-
sion, and the ITAD will automatically stop
recording.
The Call Screening volume is controlled
by the and keys.
• Call screening is off when volume
level “1” is indicated in the display.
• Call-screening level can be changed
any time even during ITAD is
answering a call.
• Default volume level is 5.
VOLUME DOWN KEY
VOLUME UP KEY
VOLUME DOWN KEY
VOLUME UP KEY
Audible Current Day and Time
You can check the current day and time
by pressing TIME/SET. After the
announcement the ITAD will generate a
beep.
Changing Speaker Volume
• Press the and keys to reach
the desired volume level. There are 8
digital volume levels.
• If volume is set at maximum or
minimum level, further pressing of
the volume keys will give 3 short beep
tones.
• Volume change automatically
continues if the volume UP/DOWN is
held.
ITAD OPERATION
TIME/SET KEY