Filter
Top Products
pg9
Your phone comes with three different coloured
handset covers. To change a cover:
1 Gently squeeze the arrows marked on either
side of the screen
2 Lift the cover and slide it away from
the keypad
3 Fit the two tabs at the top of the new cover
into the slots on the top of the handset
4 Click the cover into place.
Fixing your Mirage phone to a wall
Your phone comes with two wall fitting screws
and plugs. Make sure the plugs supplied are
suitable for your wall.
To fix your Mirage phone to a wall:
1 Use this template as a guide to mark the wall
before drilling
Check
• that the leads reach your telephone socket
and mains power supply
• that the handset will not be damaged or
cause damage if it is accidently knocked off
it’s base station
• the position guidelines given in this setting up
guide
2 Use a spirit level or plumb line to ensure the
phone will hang straight
3 Drill two holes where you have marked, insert
the wall plugs and screws – leaving a 3mm
gap between the head of the screw and the
wall
4 Slide the base station onto the screws
• make sure you don’t cut the telephone
line or power cord, this will damage your
phone and invalidate your warranty
Setting up
pg8
1 Setting up
55mm
1 Setting up
1773 full guide/21.6br 22/6/00 4:15 pm Page 8