Filter
Top Products
The BS SETTING menu lets you
choose how your base station works
You can
• set the base ringer volume
• choose the base ring melody
• bar external and intercom calls from
being made – see page 4
• change your PIN
• de-register any handset from this
base station
• reset to the factory settings
• set your phone to wait for a dial tone after
the access code on a PABX switchboard
pg28
Choosing your
base settings
▼ AUDIO
▼ CALL BARR
▼ CHANGE PIN
▼ DEREG
▼ PABX FUNCT
See page 24
▼ NETWK CODES
See page 35
pg29
▼ RINGER VOL
▼ MELODY
▼ ENTER PIN
▼ ENTER PIN
▼ NETW ACCESS
each press selects
a different volume
each press selects
a different melody
enter your current PIN
enter the switchboard
access code
▼ RESET
▼ ENTER PIN
choose off or on – if you bar calls,
the display will say CALLS BARRED
whenever you try to dial
• empty the favourite
& quick dial lists
• set the base
ringer volume to 5
• set the PIN to 0000
• set the base
melody to 1
• empty the call log
• cancel call barring
• set network codes
to BT
▼ NEW PIN
▼ RESET?
▼ REPEAT
enter your new PIN
re-enter your new PIN
to confirm
Shows a current setting
Press to scroll through menus
Press to select the feature
you want
Press and hold after
setting a feature to leave the
BS SETTING menu
STORED
Confirms a
setting you make
doing this will
▼ BS SETTING
4 Choosing your base settings
✓
1773 full guide/21.6br 22/6/00 4:15 pm Page 28