Filter
Top Products
pg37
3 Press several times until the
display says
4 Press
5 If you have more than one
base station, scroll to the one
you want to register to
6 Press
7 Enter your PIN – the factory setting
is 0000
8 Press
This may take up to 2 minutes.
9 Scroll to the handset number you
want
10 Press
11 The display changes to the handset
name. Instructions on changing the
handset name are on page??
Your phone will only allow you
three attempts at entering your
PIN before stopping the
registration. If you enter the
wrong PIN three times, you will
need to start again.
REGISTER
STORED
You can use up to six handsets
with a base station
Section contents
• Registering a handset pg 28
• Using two or more handsets pg 30
• Making an intercom call pg 30
• Answering an intercom call pg 30
• Answering an external call during
an intercom call pg 31
• Making an intercom call during
an external call pg 31
• Transferring an external call to
another handset pg 32
• Switching between an external call
and an intercom call pg 32
• Setting up 3 way calling pg 32
• Calling all your handsets
at once – group call pg 33
pg36
Adding and using additional
handsets
Registering a handset
1 Press the page button on the
base station and hold it down for
about 10 seconds until it beeps
The base station will send out
a registration signal for 15 minutes.
The signal will stop if:
• you successfully register
a handset
• you enter your PIN incorrectly
three times
• the base station already
has six handsets
• a call comes in.
2 Press
SEARCHING
▼ QUICKDIAL
▼ BASE A
ENTER PIN
6 Adding and using additional handsets
1773 full guide/21.6br 22/6/00 4:15 pm Page 36