Filter
Top Products
pg43
De-registering a handset
from a base station
These instructions are to
de-register a handset from
a base station.
1
2 Press
3 Press several times until the
display says
4 Press
5 Press several times until the
display says
6 Press
7 Enter your PIN – the factory setting
is 0000
8 Press
9 Press until the display shows
the handset you want to de-register
10 Press
11 Press to confirm
You can register each handset with up to four base
stations – perhaps if you use your phones across a
large area or you have several different phone lines.
For home use, we recommend that you have one
base station with additional handsets and chargers.
The handset will only work with one base station
at a time – the active base station.
Use the HS SETTINGS menu to choose which base
you want a handset to work with.
If you move out of range of the active base station,
the handset will not work and you will need to make
a base station that’s within range active.
Follow these stages if you buy a new handset and
base station:
• De-register your new handset
• Register the new handset at your existing base
station and register both handsets at the new
base station.
• Choose the letter for the new base station.
• Use the HS SETTINGS menu to choose the base
that you want each handset to work with.
Remember if you move out of range of this base
station, the handset will not work.
▼ DEREG
1 LOUNGE
pg42
Adding and using additional
base stations
▼ BS SETTINGS
▼ AUDIO
ENTER PIN
DEREG?
1 LOUNGE
A
Section contents
• De-registering a handset from
a base station pg 35
• Choosing the active base station pg 36
The letter shows
the active base station
7 Adding and using additional base stations
1773 full guide/21.6br 22/6/00 4:15 pm Page 42