Filter
Top Products
pg45
pg44
Choosing the active
base station
You can only make intercom
calls between handsets that
are registered to the same
base station.
1
2 Press
3 Press several times until the
display says
4 Press
5 Press
6 Press once
7 Press
8 Press until the display shows
the base station you want to be
active
9 Press
The base letter flashes and the
display says
10 Press and hold to leave the
HS SETTING menu
1 LOUNGE
▼ HS SETTINGS
▼ AUDIO
Adding and using additional base stations
STORED
▼ SELECT BASE
7 Adding and using additional base stations
B
SELECT BASE
Troubleshooting
There’s no dial tone
Check
the phone line cord is securely
connected at the handset and base station
the phone cord is not damaged
the power at the base station is on
the handset batteries are properly fitted
and fully charged
the handset is registered to the base
station. Press the page button on the base
station to ensure the handset responds.
If the handset responds, it is registered
to the base station
you have paid your phone bill.
If none of these checks work, ask your service
provider to test the line.
There’s no display on the handset
Check the handset battery is properly fitted
and fully charged. See page 11 for details on
switching the handset on.
My handset doesn’t ring
Check
the handset is switched on
the handset is registered to
the base station
the handset is within range of the
base station
the base station is active – check the
correct base station is active if you have
more than one.
My base station doesn’t ring
Check:
the power switch at the base station
is on and live
the base ringer is set to ON
the phone line cord is securely
connected and not damaged.
1773 full guide/21.6br 22/6/00 4:15 pm Page 44