Filter
Top Products
www.vtechphones.com
43
The PIN entered
will be displayed
as * symbols on
the screen.
If a base location
is full there will be
an alpha-numeric
code listed
underneath the
base name.
•
•
Register to base
00CFB-0868Bh
**
Apply
Back
Enter PIN
Register to base
00CFB-0868Bh
Register
Back
Register a handset
Step 2: To display the telephone feature menu, press the Menu softkey
from the main idle screen.
Step 3: Press the , , and/or NavKeys to choose Registration
Settings then press the Select softkey or
center NavKey/SEL/ .
Step 4: Press the up or down NavKey or to choose Handset Settings
then press the Select softkey or center NavKey/SEL/ .
Step 5: Press the up or down NavKey or to choose Register to Base
then press the Select softkey or center NavKey/SEL/ . A list of
locations for assigning telephone bases will be displayed.
Step 6: Press the up or down NavKey or to choose an empty location
and press the Register softkey or center NavKey/SEL/ .
Step 7: The handset will display Searching while it searches for the
telephone base. If the search is successful, a code from the
telephone base will be displayed. To register the handset to the
telephone base, press the Register softkey.
Step 8: In the Enter PIN box, enter the system PIN. The default PIN is
0000. Press the Apply softkey.
Step 9: Handset registered will be displayed when the registration process
is complete. The screen will return to the registration settings menu.
Press OFF to return to the idle screen.
This telephone has an intercom feature but you must own at least two
handsets to use intercom (see page 87). Additional handset(s) can be
purchased separately.
Registration Settings
Select
Back
Register to base
Base1
Base2
Base3
Base4
Register
Back
Telephone operation