Filter
Top Products
www.vtechphones.com
12
Telephone operation
Set date and time
If you subscribe to caller ID service, the date and time will be set automatically with the rst incoming
call. If you do not have caller ID service, the date and time can be set manually.
1. Make sure the handset is in idle mode.
2. Press PROG.
3. Press or until the screen displays DATE/TIME.
4. Press SEL. The current month blinks.
5. Use or to adjust the month, then press SEL.
6. Repeat step 5 to adjust the day, hour, minute and (indicates am) or (indicates pm). There
will be a conrmation beep.
Dial mode
The dial mode is preset to touch tone. If you have touch tone service, the telephone is ready for use
as soon as the battery is charged.
If you have pulse (rotary) service, the dial mode must be changed.
1. Make sure the handset is in idle mode.
2. Press PROG.
3. Press or until the screen displays DIAL MODE: and the current setting.
4. Press SEL. The current setting blinks.
5. Press or to select from TONE or PULSE.
6. Press SEL to save your selection. There will be a conrmation beep.