Filter
Top Products
www.vtechphones.com
6
Installation
• If you need
to install your
telephone within
the same room
as other cordless
telephones or
wireless products,
you may need to
select a different
channel for your
router or change
the channel on
your handset.
This power
adapter is
intended to be
correctly oriented
in a vertical
or oor mount
position. The
prongs are not
designed to hold
the plug in place if
it is plugged into a
ceiling, under-the-
table or cabinet
outlet
•
Telephone base installation
Install the telephone base and the power adapter as shown below. Choose a location away from
any electronic equipment and appliances such as personal computers, computer routers, wireless
routers (wireless broadband, wi-, or 802.11), television sets, microwave ovens and refrigerators.
Avoid excessive heat, cold, dust or moisture.
Plug the connector of the power adapter to the connector jack at the bottom of the telephone base.
Then plug the power adapter into a standard electrical outlet not controlled by a wall switch.
Connect the telephone line cord to the jack at the bottom of the telephone base, and the other
end to the wall jack.
If you receive high speed internet through your telephone line (commonly referred to as DSL) and
you are experiencing interference during telephone conversations and/or your caller ID features
are not functioning properly, install a DSL lter to the telephone line between the telephone base
and the telephone wall jack. Contact your DSL service provider for a DSL lter.
•
•
To single-line
telephone jack (RJ11C)
Telephone line cord
DSL lter
(optional for DSL
users)
To power outlet
AC power adapter