Filter
Top Products
8
Follow the steps below:
1. Remove the battery cover by
pressing on the indent and
sliding downward.
2. Place the new battery pack in the
handset with the metal contacts
aligned with the charge contacts
in the battery compartment.
3
. Replace the battery cover by
sliding it upwards.
4. If the new battery pack is not
already charged, place the
handset in the base unit, or a
remote charging stand, and allow
it to charge for 12 hours. After
initial charge, a maintenance
charge of 8 hours should be
sufficient.
InstallationInstallation
InstallationInstallation
Installation
of Batteryof Battery
of Batteryof Battery
of Battery
Pack in HandsetPack in Handset
Pack in HandsetPack in Handset
Pack in Handset
The original Handset that is shipped with your
20-243220-2432
20-243220-2432
20-2432 system will be
automatically registered to the Base. This Handset is
HANDSET 1HANDSET 1
HANDSET 1HANDSET 1
HANDSET 1.
As you register additional Handsets to the system, they will be assigned
extension numbers in the following order:
HANDSET 2HANDSET 2
HANDSET 2HANDSET 2
HANDSET 2,
HANDSET 3HANDSET 3
HANDSET 3HANDSET 3
HANDSET 3,
HANDSET 4HANDSET 4
HANDSET 4HANDSET 4
HANDSET 4, etc.
Whenever a charged Handset battery pack is installed, the Handset will
automatically begin
SEARCHING FOR BASESEARCHING FOR BASE
SEARCHING FOR BASESEARCHING FOR BASE
SEARCHING FOR BASE (if previously registered), or
it will prompt you to
ENTER BASE IDENTER BASE ID
ENTER BASE IDENTER BASE ID
ENTER BASE ID to register the new Handset. See
Registration and OperationRegistration and Operation
Registration and OperationRegistration and Operation
Registration and Operation for details.
Getting StartedGetting Started
Getting StartedGetting Started
Getting Started
1
3
2