Filter
Top Products
30
Advanced OperationsAdvanced Operations
Advanced OperationsAdvanced Operations
Advanced Operations
Flash FunctionFlash Function
Flash FunctionFlash Function
Flash Function
During an active call pressing either the
MUTEMUTE
MUTEMUTE
MUTE soft key on the Handset or the
MUTEMUTE
MUTEMUTE
MUTE key on the Base (when in
Speakerphone or Headset mode), will
disable the microphone. Press
MUTEMUTE
MUTEMUTE
MUTE
again to return to the 2-way
conversation.
Hold FunctionHold Function
Hold FunctionHold Function
Hold Function
From the Handset :From the Handset :
From the Handset :From the Handset :
From the Handset :
• Press the
HOLDHOLD
HOLDHOLD
HOLD soft key to place a
call on hold. To return to the call
press the appropriate
LINE.LINE.
LINE.LINE.
LINE.
From the Base :From the Base :
From the Base :From the Base :
From the Base :
• During an active call, press the
HOLDHOLD
HOLDHOLD
HOLD key to place a call on hold.
The
LINELINE
LINELINE
LINE key will flash to indicate
a call is on hold.
• To return to the call press the
appropriate
LINELINE
LINELINE
LINE and then press
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONE.(or
HEADSETHEADSET
HEADSETHEADSET
HEADSET)
You can use your
20-243220-2432
20-243220-2432
20-2432 with
services such as call waiting. Simply
press the
LINELINE
LINELINE
LINE key on the Handset
or the
FLASHFLASH
FLASHFLASH
FLASH key on the Base (when
in Speakerphone or Headset mode) to
flash the line.
Mute FunctionMute Function
Mute FunctionMute Function
Mute Function
If the Base is active on one line when the idle line rings, you will hear a special
alert tone, signifying an inbound call. This alert is designed to minimize
disruption of the call in progress. You can then:
• Press
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONE (or
HEADSETHEADSET
HEADSETHEADSET
HEADSET if you are using a Headset
connected to the Base) to end the first call, then Press
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONE
or
HEADSET HEADSET
HEADSET HEADSET
HEADSET to answer the new call;
-OR--OR-
-OR--OR-
-OR-
• Press the
HOLDHOLD
HOLDHOLD
HOLD soft key to place the original call on hold. After that,
press the appropriate
LINELINE
LINELINE
LINE key and then
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONE (or
HEADSETHEADSET
HEADSETHEADSET
HEADSET) to answer the new call. You can end the “new” call by pressing
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONE (or
HEADSETHEADSET
HEADSETHEADSET
HEADSET). Return to the original call by pressing
the appropriate
LINELINE
LINELINE
LINE key and then
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONE (or
HEADSETHEADSET
HEADSETHEADSET
HEADSET).
You can also Conference both lines together . See
Conference CallingConference Calling
Conference CallingConference Calling
Conference Calling, further
on in this User’s Manual.
Handset and Base OperationHandset and Base Operation
Handset and Base OperationHandset and Base Operation
Handset and Base Operation