Filter
Top Products
39
Headset OperationHeadset Operation
Headset OperationHeadset Operation
Headset Operation
Your
20-243220-2432
20-243220-2432
20-2432 Handset is equipped with a 2.5mm Headset Jack for use with
an optional accessory Headset for hands-free operation. If you choose to use
the Headset option, you must obtain an optional accessory Headset, which
is compatible with the
20-243220-2432
20-243220-2432
20-2432.
To purchase a Headset, please call 1-800-651-6791.To purchase a Headset, please call 1-800-651-6791.
To purchase a Headset, please call 1-800-651-6791.To purchase a Headset, please call 1-800-651-6791.
To purchase a Headset, please call 1-800-651-6791.
Once you have a compatible 2.5mm Headset, locate the Headset Jack on the
20-243220-2432
20-243220-2432
20-2432 Handset. Connect the plug on the Headset cord to the jack(under a
small rubber flag) on the cordless Handset. The plug should fit securely. Do
not force the connection.
Headset Operation connected toHeadset Operation connected to
Headset Operation connected toHeadset Operation connected to
Headset Operation connected to
the Handsetthe Handset
the Handsetthe Handset
the Handset
NOTE :NOTE :
NOTE :NOTE :
NOTE :
Whenever a compatible Headset is
connected to the cordless Handset, the
microphone on the Handset will be
muted. This is done to limit the effect
of background noise.
Headset Operation connected toHeadset Operation connected to
Headset Operation connected toHeadset Operation connected to
Headset Operation connected to
the Base Unitthe Base Unit
the Base Unitthe Base Unit
the Base Unit
The same type of Headset can be
connected to the Base Unit. Facing the
Base, the Headset jack can be found
on the near corner of the right side
panel.When using a Headset attached
to the Base, calls are made and
answered by pressing the
HEADSETHEADSET
HEADSETHEADSET
HEADSET
key. This key is also used to end your
call. The Base Speakerphone and
Base Headset cannot be used
simultaneously. However, you can
switch between the two modes by
pressing
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONESPEAKERPHONE
SPEAKERPHONE and
HEADSETHEADSET
HEADSETHEADSET
HEADSET without disconnecting
your Headset.
Belt ClipBelt Clip
Belt ClipBelt Clip
Belt Clip
The
20-243220-2432
20-243220-2432
20-2432 is also equipped with a
detachable belt clip. Align the pins
on the inside edge of the clip with
the notches on the sides of the
20-20-
20-20-
20-
24322432
24322432
2432 Handset. The belt clip should
snap securely into place. Do not force
the connection.
Additional InformationAdditional Information
Additional InformationAdditional Information
Additional Information