Filter
Top Products
13
Enter Base ID CodeEnter Base ID Code
Enter Base ID CodeEnter Base ID Code
Enter Base ID Code
1. After charging the Handset, remove it
from its Charge Cradle; the screen will
display:
alternating with this screen:
2. If, after charging the Handset, you see:
3. Press
NEW.NEW.
NEW.NEW.
NEW. You will now see the
ENTER BASE IDENTER BASE ID
ENTER BASE IDENTER BASE ID
ENTER BASE ID screen as described in
step 1.
4. Find the
BASE ID CodeBASE ID Code
BASE ID CodeBASE ID Code
BASE ID Code by doing the
following: (the Base must be in idle (OFF)
mode)
A. At the
BaseBase
BaseBase
Base, press
MENUMENU
MENUMENU
MENU
B. Scroll down to
DISPLAY BASE-IDDISPLAY BASE-ID
DISPLAY BASE-IDDISPLAY BASE-ID
DISPLAY BASE-ID
C. Press
OK.OK.
OK.OK.
OK. The Base screen will display
the 15-digit
ID Code. ID Code.
ID Code. ID Code.
ID Code. Afterwards, it will
return the idle screen.
5. Enter the 15-digit
Base ID CodeBase ID Code
Base ID CodeBase ID Code
Base ID Code into the
HandsetHandset
HandsetHandset
Handset; then press
OK.OK.
OK.OK.
OK.
Registration and OperationRegistration and Operation
Registration and OperationRegistration and Operation
Registration and Operation
7. If the Handset displays
REJECTED BY BASEREJECTED BY BASE
REJECTED BY BASEREJECTED BY BASE
REJECTED BY BASE or continues to display
SEARCHING FOR BASESEARCHING FOR BASE
SEARCHING FOR BASESEARCHING FOR BASE
SEARCHING FOR BASE for well beyond 60 seconds, try the registration
process again by repeating the above steps.
Congratulations! You can now enjoy the benefits of your 2-Line Multi-
Handset system.
6. Wait approximately 15 to 60 seconds. You
will hear confirmation beeps from the Base
and Handset. The newly registered Handset
will now assign itself the lowest handset
number not previously assigned to a
different system Handset (1 through 8).
Getting StartedGetting Started
Getting StartedGetting Started
Getting Started