Filter
Top Products
41
In Case Of DifficultyIn Case Of Difficulty
In Case Of DifficultyIn Case Of Difficulty
In Case Of Difficulty
If you have difficulty operating your phone, the suggestions below should
solve the problem. If you still have difficulty after trying these suggestions,
call the Supplier at (800) 651-6791.
The Phone Doesn't Work At AllThe Phone Doesn't Work At All
The Phone Doesn't Work At AllThe Phone Doesn't Work At All
The Phone Doesn't Work At All
• Make sure the Power Cord is plugged in.
• Make sure the telephone line cord is plugged firmly into the Base Unit
and the telephone wall jack.
• Make sure the batteries are properly charged. If the 'LOW BATTERY'
message is shown, the battery pack needs charging.
• Is the Handset registered to the Base? See Registration and Operation.
No Dial ToneNo Dial Tone
No Dial ToneNo Dial Tone
No Dial Tone
• First check all the suggestions above.
• If you still don't hear a dial tone, disconnect the Base Unit from the telephone
jack and connect a different phone. If there is no dial tone on that phone
either, the problem is in your wiring or local service. Contact your local
telephone company.
You Get Noise, Static, Or A Weak Signal Even When You're Near TheYou Get Noise, Static, Or A Weak Signal Even When You're Near The
You Get Noise, Static, Or A Weak Signal Even When You're Near TheYou Get Noise, Static, Or A Weak Signal Even When You're Near The
You Get Noise, Static, Or A Weak Signal Even When You're Near The
Base UnitBase Unit
Base UnitBase Unit
Base Unit
• Household appliances plugged into the same circuit as the Base Unit can
sometimes cause interference. Try moving the appliance or the Base Unit
to another outlet.
You Get Noise, Static, Or A Weak Signal When You're Away FromYou Get Noise, Static, Or A Weak Signal When You're Away From
You Get Noise, Static, Or A Weak Signal When You're Away FromYou Get Noise, Static, Or A Weak Signal When You're Away From
You Get Noise, Static, Or A Weak Signal When You're Away From
The Base UnitThe Base Unit
The Base UnitThe Base Unit
The Base Unit
• You may be out of range. Either move closer to the Base, or relocate the
Base Unit.
• The layout of your home may be limiting the range. Try moving the Base
Unit to another position.
The Handset Does Not Ring When You Receive A CallThe Handset Does Not Ring When You Receive A Call
The Handset Does Not Ring When You Receive A CallThe Handset Does Not Ring When You Receive A Call
The Handset Does Not Ring When You Receive A Call
• Make sure you have the Handset ringer activated. To set the ringer, see
HANDSETHANDSET
HANDSETHANDSET
HANDSET and
BASE SETTINGSBASE SETTINGS
BASE SETTINGSBASE SETTINGS
BASE SETTINGS.
• Make sure the telephone line cord is plugged firmly into the Base Unit
and the telephone jack. Make sure the power cord is plugged in.
• You may be too far from the Base Unit.
• You may have too many extension phones on your telephone line to allow
all of them to ring. Try unplugging some of the other phones.
Additional InformationAdditional Information
Additional InformationAdditional Information
Additional Information