Filter
Top Products
7
SetupSetup
SetupSetup
Setup
Plug the AC power adapter into an electrical outlet, and the DC connector
into the back of the base unit.
Connecting to the telephone lines
Your 2-Line
20-243220-2432
20-243220-2432
20-2432 will work fine even if you only have one telephone line.
We recommend connecting the modular telephone cord to the jack labeled
LINE 1 / L1 + L2LINE 1 / L1 + L2
LINE 1 / L1 + L2LINE 1 / L1 + L2
LINE 1 / L1 + L2, located on the bottom of the Base Unit. Here are steps for
connecting
2 2
2 2
2 lines:
If you have
2 Lines2 Lines
2 Lines2 Lines
2 Lines coming out of a
Single Wall Jack:Single Wall Jack:
Single Wall Jack:Single Wall Jack:
Single Wall Jack:
Connect a
4-wire4-wire
4-wire4-wire
4-wire (RJ-14) modular phone cord between the wall jack and the
phone jack labeled
L1 / L1 + L2.L1 / L1 + L2.
L1 / L1 + L2.L1 / L1 + L2.
L1 / L1 + L2.
If you have
2 Lines,2 Lines,
2 Lines,2 Lines,
2 Lines, each coming out of
Separate Wall Jacks:Separate Wall Jacks:
Separate Wall Jacks:Separate Wall Jacks:
Separate Wall Jacks:
Connect a modular phone cord from the wall jack you want to designate as
your LINE 1, to the
LINE 1 / L1 + L2LINE 1 / L1 + L2
LINE 1 / L1 + L2LINE 1 / L1 + L2
LINE 1 / L1 + L2 jack on the bottom of the Base Unit. Next,
connect a phone cord from the remaining wall jack to the
LINE 2 LINE 2
LINE 2 LINE 2
LINE 2 jack on the
Base Unit.
Data PortData Port
Data PortData Port
Data Port
Your 2-Line
20-243220-2432
20-243220-2432
20-2432 has a Data Port on the back of the Base Unit. This port
provides an easy way to connect your fax machine, laptop computer, modem
or other telephone device for direct access to
LINE 2LINE 2
LINE 2LINE 2
LINE 2.
The Data Port only provides access to Line 2, so you must have an active line
connected to the
LINE 2LINE 2
LINE 2LINE 2
LINE 2 jack on the bottom of the Base Unit. Connect a
modular phone cord from the Data Port (look for the small door marked
DATADATA
DATADATA
DATA
on the back of the Base Unit) to your fax, laptop, etc.
NOTE:NOTE:
NOTE:NOTE:
NOTE: While the Data Port is in use, accidental use of Line 2 by a parallel
phone, your
20-243220-2432
20-243220-2432
20-2432, or a Call Waiting ID alert may interrupt the data
transmission.
Getting StartedGetting Started
Getting StartedGetting Started
Getting Started
To AC outlet
To telephone
jack
To telephone
socket outlet
AC adapter
Examples of 1-Line and 2-Line Cords
RJ-11
One line
cord
RJ-14
2 line
cord
LINE 2
LINE 1/
L1 + L2
7V DC
!
COMPLIES WITH 47 CFR PART 68
REGISTRATION NO.: US: EW7 WI00B80-513700
RINGER EQUIVALENCE: 0.0B
USOC JACK: RJ11C, RJ14C
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: 1)THIS DEVICE MAY
NOT CAUSE HARMFUL INTERFERENCE; AND 2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
PRIVACY OF COMMUNICATIONS MAY NOT BE ENSURED WHEN USING
THIS PHONE.
MODEL : 20-2432
VTECH TELECOMMUNICATIONS LTD.
MANUFACTURED IN CHINA
FCC ID: EW780-5001-00
HAC
7V DC
!