Filter
Top Products
23
Basic OperationBasic Operation
Basic OperationBasic Operation
Basic Operation
RegisterRegister
RegisterRegister
Register
RegisterRegister
RegisterRegister
Register
Use this option to register a Handset to the
20-243220-2432
20-243220-2432
20-2432 Base. You can register
a total of eight Handsets to the
20-243220-2432
20-243220-2432
20-2432 Base. This process is activated
automatically whenever a new handset is powered up in range of the
20-243220-2432
20-243220-2432
20-2432
Base.
You will be prompted to enter the 15-digit Base ID code. See
Registration andRegistration and
Registration andRegistration and
Registration and
OperationOperation
OperationOperation
Operation, located in the
Getting StartedGetting Started
Getting StartedGetting Started
Getting Started section of the manual, for details.
Note : Note :
Note : Note :
Note : Base ID codes are 15 digits long and can include the following characters:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, or * .
Handset DeregistrationHandset Deregistration
Handset DeregistrationHandset Deregistration
Handset Deregistration
You can deregister all Handsets at one time. This causes the Base Unit to ‘forget’
that it has any Handsets at all. You may never have to perform this procedure.
One possible reason for deregistration is if you have the maximum number
of Handsets (8) registered to your Base, and one Handset should require
replacement, the Base will not register the ‘new’ Handset, because its eight
memory slots are occupied. The deregistration procedure will clear the Base
Unit’s memory, and you will be able to register each Handset again. Individual
Handsets cannot be deregistered.
CAUTION: Once you deregister, your Handsets will not be capable of makingCAUTION: Once you deregister, your Handsets will not be capable of making
CAUTION: Once you deregister, your Handsets will not be capable of makingCAUTION: Once you deregister, your Handsets will not be capable of making
CAUTION: Once you deregister, your Handsets will not be capable of making
or receiving calls. You will need to re-register each Handset, one at a time!!or receiving calls. You will need to re-register each Handset, one at a time!!
or receiving calls. You will need to re-register each Handset, one at a time!!or receiving calls. You will need to re-register each Handset, one at a time!!
or receiving calls. You will need to re-register each Handset, one at a time!!
To Deregister all Handsets:To Deregister all Handsets:
To Deregister all Handsets:To Deregister all Handsets:
To Deregister all Handsets:
· At the Base Unit, in the idle (OFF) mode, press
MENU.MENU.
MENU.MENU.
MENU.
· Scroll down to
SETUP BASESETUP BASE
SETUP BASESETUP BASE
SETUP BASE, then press
OK.OK.
OK.OK.
OK.
· Scroll down to
DEREGISTER ALLDEREGISTER ALL
DEREGISTER ALLDEREGISTER ALL
DEREGISTER ALL, then press
SET.SET.
SET.SET.
SET.
All system Handsets have been deregistered. To register your Handsets again,
see
Registration and OperationRegistration and Operation
Registration and OperationRegistration and Operation
Registration and Operation, located in the
Getting StartedGetting Started
Getting StartedGetting Started
Getting Started section of the
User’s Manual, for details.