Filter
Top Products
Answering System Troubleshooting Chart
Specifications
Problem
Suggestion
Answering System does not work.
l
.pke
sure that the Base Unit is plugged
l Make sure the Answering System is
turned on.
Answering System does not answer calls.
Messages are incomplete.
After a power failure, the outgoing message
is deleted.
Message Counter LED flashes the letter P.
No sound on the Base Units
I)
eaker during
call monitoring or message p
ayback
Cannot access remote call-in features from
another touch-tone phone.
Cannot record outgoing message (ogm).
Clock losses time.
75
76
l Press the RESET button to reset the
system after an AC line spike.
l Set the
REC
TIME/ANN/4/1
switch in
either the
4-mintue
or 1 -minute position.
l The memorv mav be full. Delete some or
all of the
saved messages.
l The incoming messages may be too long.
Remind callers to leave a brief message.
l The memory may be full. Delete some or
all of the saved messages.
l The
answering
machine has a flash
memory with no battery backup. Record
7
our personal outgoing message again.
he default messages should still remain.
l There has been a power failure. Press
RESET to
reset the Answering System.
l Adjust the volume control on the side of
the Base Unit.
l
fv?;v?b;rure
you’re using the correct PIN
l Make sure that the touch-tone phone
ou’re
Y
using can transmit the tone for at
east two seconds. If it cannot. vou mav
have to change to another phone.
’
l The memory may be full.
Delete some or all of the saved
l The power to the base unit has been
interrupted.
Reset the clock as detailed on page 41
of this owner’s manual.
-
General
Frequency Control
Phase Locked
Lcop
(PLL) Synthesizer
Modulation
FM
Operating Temperature
-10˚ to 50˚C
Base Unit
Receive Frequency
Transmit Frequency
Power Source
Size
Weight
39.775-40.000 MHz (10 Channels)
30.075-30.300 MHz (10 Channels)
AAD-650U
AC Adapter
(N14700)
Output:
9V,
350mA DC
Input:
230-240V
AC,
50Hz
213 (W) x 140 (D) x 48 (H) mm
Approx. 667 gm
Handset
Receive Frequency
Transmit Frequency
Power Requirements
Size
Weight
Battery
Answering System
memory Type
memory Capacity
Message Length
30.075-30.300 MHz (10 Channels)
39.775-40.000 MHz (10 Channels)
Rechargeable
Ni-Cd
Battery Pack
56 (W) x 68 (D) x 307 (H) mm
(w/
antenna)
Approx. 353 gm (including battery)
BT-l 61
Capacity
270
mAh,
3.6V
Talk Mode
6 hours
Standby Mode
14 days
Digital Tapeless Recording
20 min.
(nominal) (40
messages)
1 min. or 4 min. Incoming Message
(max.)
1 min. outgoing message (max.)
Specifications, Features, and availability of Optional Accessories are all
subject to change without prior notice.