Filter
Top Products
Using the Reset Button
The
RESET button
is used to erase all recorded outgoing messages and any
messages which are saved in memory. Pressing
RESET does
not erase
your PIN (Personal Identification Number) code or the security code between
the Handset and Base Unit, and the Time and Day Stamp.
4
&I
When RESET is pressed, the Message Counter
begins to flash and display P. See page 10,
“Applying Power to the Base Unit,” for instructions
on returning the system to Standby.
Note; The RESET button may also be used in the unlikely event that an
AC power line disturbance causes the answering system to
malfunction and become inoperative.
Using Your Answering System
Playing New Messages
Handset Operation
1.
Press
a.
The current Time and Day
Stamp and number of stored
new messages is announced.
2.
Press
*.
The message is announced
first, then the Day and Time
stamp afterwards.
Note;
If
you want to stop
reviewing your messages,
press
W.
3.
When all messages have
played, a long tone sounds
followed by the announcement
“End of messages”
plays.
Note: If less than five minutes
record time remains, the actual
record time remaining for new
messages immediate/y
follow
“End
of messages” announcement.
51
52