Filter
Top Products
If the Base Unit loses power while the Handset is off the Base, the Digital
Code may be erased. When this happens, the Handset will not function. To
reestablish communication between the Handset and Base Unit:
1.
Restore power to the Base
Unit.
2.
Place the Handset back on
the Base Unit.
I!
3.
The
charge
LED will blink
quickly, indicating that the
Digital Code has been reset.
Making and Receiving Calls
The following features of the
XCA650/XCA750
phone are different
depending on the Handset’s Location when you make or receive a call.
ANSWER
CALL
HANDSET ON
BASE
Pick up Handset
(AutoTalk)
1) Pick up Handset
MAKE CALL
2)
PreSS
@
3)
Listen for dial tone
4) Dial the number
Press
@
HANG
-OR-
UP
Return Handset to Base
(AutoStandby)
HAN;;:;
OFF
Press
speaker
button on the
Base Unit.
fVote:
You must use the
Handset to make a call.
Press speaker button on the
Base Unit.
REDIAL
1) Pickup Handset
2) Press
@
3)
Listen for dial tone
4) Press
@
Afofe:
You must use the
Handset to make a call.
Note: Sometimes when you press
@
to hang up the phone, you may get
an error tone and the phone
will
not disconnect. If this happens,
place the Handset on the Base Unit
or press
@
again while
holding the Handset close to the Base Unit.
Using Your Phone
29
30