Filter
Top Products
TROUBLESHOOTING
I
\..:)
z
~
~
0
0
:::t=
er.:;
~
~
§§
0
~
~
30
. Try unplugging some of theother
phones. You may have too many
extension phones on your telephone
line.
. Disconnect the ACAdaptor for a few
minutes and reconnect it.
Handset can't ring or receive a
. Battery Pack may be weak. Charge the
page. battery on the Base Unitfor more than
12hours.
.ExtendtheBaseandHandset
antennas fully.
. The Handset may be too far away from
the Base Unit. Try moving closer.
. Place the Base Unit away from noise
sources.
. The Digital Security code may be
erased. Set the Digital Security code.
(See Oa2e 21 for instructions).
If you lose a call after changing
.You were probably almost out of range.
channels.
Move closer to the base before
changing channels. Before placing the
call again, place the Handset on the
base for at least 6 seconds.
Phone seems dead? . Remove the Handset from Base Unit
Power off and on again. (if it is on the Base Unit).
.Removethe Handset batteryfor
5 minutes.
If you are unable to turn the
. Unplug the base Unit from the main
Handset ON/OFF,or ifthe base
power supply for 5 minutes.
consistently fails to respond to
. Reinstall the battery to the Handset.
the keys being pressed.
. Restore power to the Base Unit.
. Place the Handset back on the
BaseUnit.