Filter
Top Products
INSTALLATION
a) Checkto see that the ACAdaptor is plugged in and the wall
outlet is switched on.
b) Re-adjust the handset until the charge LEDlights up.
c) Cleanthe charge contacts.
Low Battery Indicator
When the Battery Pack voltagelevel in the Handset is verylow and
needs to be re-charged, the batt Iow LEDblinks. Ifthis occurs
while you are on the phone, a short alert beep will also be heard.
When this happens, complete your call as early as possible, and
return the Handset to the ChargingBase for charging. Allow12 to 16
hours without any interruption for the handset to fullyrecharge.
Cleaning the Battery Charge Contacts
Tomaintain a good charge condition, it is important to clean all 6
charge contacts on the Handset and ChargingBase about once a
month. Usea pencil eraser or other contact cleaner. Do not use any
liquids or solvents.
Clean charge
contacts regularly
Clean charge
contacts regularly
~
Z
r:./)
~
~
~
0
Z
19