Filter
Top Products
Step 2 Activate the Handset Before Charging the Battery
When the handset battery pack is fully
charged, after 15-20 hours of charging, plug
the telephone cord into the base unit and
then into a telephone wall jack.
Your phone is set for tone dialing. If your
local network requires pulse dialing, please
see “Choosing the dialing mode” on page 17.
A
Before charging the
battery, push the
pin located on the
bottom of the
handset to activate
(see label with
instructions).
TO SET CALLER ID, LANGUAGE AND DIALING OPTIONS
A
Press and hold the cid/menu key.
B
Press the vol/+ or vol/- key to move
the pointer to an option.
C
Press select to change the
option setting.
D
Press end to exit, and return the
handset to the base.
OPTIONS INCLUDE
A
Auto Talk On/Off
B
CIDCW On/Off
(Caller id/call waiting)
C
Area Code Enter/Remove
D
Dial Pulse/Tone
D
Place the handset in the base and
charge continuously for 15 - 20 hours
before using the phone.
B
Peel off the label.
C
Plug the AC adapter cord into the
base unit and then into a 120V
AC outlet.
Note:
Three Caller ID options are available: AutoTalk,
Caller ID on Call Waiting (CIDCW), and Area Code.
Note: Your handset comes with the battery
already connected. You must activate the
handset. Please see the instructions below.
QUICK REFERENCE GUIDE
Step 3 Connect to Phone Line
Step 4
Setting Display Options
Uniden Parts Department at (800) 554-3988
Hours: M-F 8:00 a.m. to 5:00 p.m. CST.
We can also be reached on the web at
www.uniden.com
Make sure you have received the following
items in the package. If any of these items
are missing or damaged, contact the Uniden
Parts Department.
• Base unit • Beltclip
• Handset • This Owner’s Manual
• AC adapter
• Other Printed Material
• Telephone cord
QUICK REFERENCE GUIDE [ 3]www.uniden.com
Step 1 Checking the Package Contents
E
Language Eng (English)/Fr. (French)
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 3