Filter
Top Products
GETTING STARTED [ 11]www.uniden.com
GETTING STARTED
• Even when the
battery pack is not
being used, it will
gradually discharge
over a long period
of time. For optimum
performance, be sure
to return the handset
to the base unit after
a telephone call.
• Talk Mode -
The handset is off the
base and talk/flash
has been pressed
enabling a dial tone.
• Standby Mode -
The handset is not in
use, off the base and
talk/flash has not
been pressed. A dial
tone is not present.
The last number dialed in the redial memory, as well as, the names and the numbers
stored in the memory locations are retained for up to 30 minutes while you replace the
battery pack.
Low battery alert
When the battery pack is very low and needs to be charged,
the phone is programmed to eliminate functions in order
to save power. If the phone is not in use, “
Low Battery”
appears on the LCD and none of the keys will operate.
If the phone is in use, “
Low Battery” flashes and the
handset beeps. Complete your conversation as quickly as
possible and return the handset to the base unit for charging.
Battery use time (per charge)
From fully charged (15-20 hours charge time)
• Up to seven hours continuous use during talk mode
• Up to fourteen days when the handset is in the standby mode
If the rubber seal appears warn, nicked, or dried out,
replacement seals are available through the Uniden Parts
Department. If you have questions regarding installation of
battery pack and/or rubber seal, please call our Customer
Hotline at 1-800-297-1023.
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 11