Filter
Top Products
BASICS
BASICS [ 21]www.uniden.com
Tone Dialing Switch-over
Some telephone companies use equipment that requires pulse
dialing (sometimes referred to as rotary dialing).
If you need to enter tone dialing digits, you can switch-over to
tone dialing during the call. For example, entering your bank
account number after you have called
your bank.
Initially make your call with the pulse dialing mode. Once your call connects,
press the
*
/tone/
tt
key. Enter the desired number. These digits will be sent as
tone dialing. Once the call ends, the tone mode is canceled and pulse dialing
mode resumes.
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit, noise
increases. If you pass the range limits of the base unit, your call will terminate
within 5 minutes.
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number
can be stored in a
memory location.
This is referred to
as Chain Dialing
(see page 27.)
UC393BH (WXI377) OM 5/2/03 4:18 PM Page 21