Filter
Top Products
[39] PHONEBOOK
www.uniden.com
Using One Touch Voice Mail Access
The UIP1868P provides one-touch access to Packet8's voice mail
service. follow the steps below to program the Packet8 access number
into the base and any handset(s):
1) Press the MENU soft key, then choose Base Setup on the base or
Handset Setup on any handset.
2) Scroll down and select Edit Voice Mail.
Edit V_ mail No.
appears in
the display.
3) Enter the Packet8 VoiceMail access number: 012-0555.
4) Press the OK soft key.
When you have new messages, the New Message LED will flash. To
retrieve your messages, simply press the soft key. If you have not
entered the access number or it has been deleted, when you press the
the soft key,
No Number Stored To store number press [MENU]
appears and you
will hear a beep. The phone returns to standby mode.
Resetting the New Message LED
If the LED remains on after you’ve retrieved your messages, you may need to reset
the indicators. With the phone in standby mode, press and hold find handset on
the base until the paging sound stops (about 5 seconds).
The Voice Mail tone is
pre-programmed to
support Packet8's voice
mail service. Do not
alter this setting.