Filter
Top Products
[15] GETTING STARTED
www.uniden.com
Registering Expansion Handsets
Handsets supplied with the phone are registered to the
base by the factory. When charged, pre-registered
handsets display a handset ID number. Handsets that have
not been registered display
Place handset on main base to
register
. When you register an extra handset to the base, the handset ID will be
assigned.
Before the expansion handset is registered, the battery pack MUST be charged for
15-20 hours.
To register expansion handsets, follow the steps below:
1) Make sure the main base is in standby mode.
2) On the base, press the MENU soft key, and then select HS Registration.
3) On the handset, press and hold # for two seconds. To cancel registration, press
the CANCEL soft key on the base.
4) While the handset is registering,
Handset Registering
will appear in the Handset
LCD. When
Registration Complete
is displayed, the handset has been registered
to the base. If
Registration Failed
appears, please try these steps again.
2NCEGJCPFUGV
QPOCKPDCUG
VQTGIKUVGT
/76' %9&:
If a handset has ever
been registered to a
different base, you
must de-register the
handset before you
can register it to the
new base (see page
16.)
note
GETTING STARTED