Filter
Top Products
BASICS [32]
www.uniden.com
Hanging Up
From the handset or handset speakerphone, press end. (If AutoStandby is turned
on, you can just return the handset to the cradle.)
From the base, press speaker or return the corded handset to the base.
Switching to the Speakerphone During a Call
On the handset or base to switch a normal call to the speakerphone, press speaker.
To switch from a speakerphone call to a normall call, press speaker again.
Call Waiting
If a call waiting tone sounds while you are on a call,
press talk/flash on the handset or flash on the base
to accept the waiting call. There is a short pause, and
then you will hear the new caller. To return to the
original caller, press talk/flash on the handset or
flash on the base again.
Placing a Call on Hold
1) During a call, press intcom/hold on the handset or
intercom/hold on the base. The call will be put on
hold.
If you leave a call on hold for more than ten seconds, the
display screen will read,
Line On Hold
.
*QNFVQVTCPUHGT
*CPFUGV
*CPFUGV
$#%- &'.'6' 1-
BASICS