Filter
Top Products
Leaving a Memo Message
You can use the EXAI918 to leave a Memo
Message up to 60 seconds long for someone else
who uses your Answering System.
To record a memo message, follow these steps:
1. Press and hold
memo
.
2. When the message
counter begins to
count up (1,2,...),
speak into the
microphone. When
you finish speaking,
release
memo
.
There is a tone, the
Message Counter
begins to flash, and
the system returns
to standby.
Remote Operation
You can operate your EXAI918 while you’re away from home by calling from any touch-tone phone.
When using this feature, you cannot change the Time and Day Stamp or your
PIN
code from a
touch-tone phone.
Using a Touch-Tone Phone
You can operate your Answering System using any
touch-tone telephone. Use this function to check
for recorded messages, play or delete messages,
or even record a new outgoing message.
1. Call your telephone number.
2. During the outgoing
message playback,
press
# followed by
your
PIN
number.
3. The Answering System announces the Time
Stamp followed by the number of new
messages stored in memory. If you have
messages they are played.
4. You then hear intermittent beeps indicating
that the system is in the Command
Waiting Mode.
Note: You must enter a command within 20
seconds or the Answering System hangs up
and returns to Standby.
5. Use this chart to select the function you want.
Function Press
Repeat [#]+[1]
Play Message [#]+[2]
Skip [#]+[3]
Delete Message [#]+[4]
Answer On/Off [#]+[5]
Stop [#]+[6]
Record OGM/Rec Stop [#]+[7]
Play New Message [#]+[8]
Review OGM [#]+[9]
Help [#]+[0]
6. When you’ve finished, hang up to exit the
system.
Your Answering System automatically returns
to Standby.
EXAI918 31
O:\EXAI918\exai918 converted.vp
Thu Jun 08 11:46:12 2000
Color profile: Disabled
Composite Default screen