Filter
Top Products
4. Plug one end of the
long telephone cord
into the
TEL LINE
jack on the
Base Unit.
5. Place the cord
inside the molded
channel on the
bottom of the
Base Unit.
6. Place the Base Unit
on the screws and
push down until it’s
firmly seated.
7. Plug the other end
of the telephone line
cord into the wall
jack.
8. Plug the AC
Adapter into a
standard 120V AC
wall outlet.
Note: Do not use
an outlet controlled
by a wall switch.
Setting the Handset Retainer
The handset retainer holds the Handset in place if
your phone is mounted on a wall. The steps below
describe how to remove and replace the retainer
so that the tab faces up.
1. Push up on the
Handset retainer on
the Base Unit, and
slide the tab out.
2. Flip the retainer
over so the tab
faces up.
3. Put the retainer
back into its slot on
the Base Unit.
4. Push down on the
Handset retainer
until it snaps into
place.
12 EXAI918
O:\EXAI918\exai918 converted.vp
Thu Jun 08 11:44:05 2000
Color profile: Disabled
Composite Default screen