Filter
Top Products
For example, selecting 40 mSec
Press CD. The lCD displays
PI ][
3. Press the @ Key to complete the programming.
Two beeps will be heard and the unit returnsto its
previous status prior to accessing Programming Mode.
Lead-In Delay
lead-In delay is a SElCAll transmit parameter that
"wakes-up" and helps the receiver of the other radio to lock
onto the incoming signal. Every time you Transmit a
SElCAll ID, lead-In Delay attaches itself in the beginning
of the code sequence and makes the transmitter to be ON
longer prior to the code transmission. This sets the commu-
nication link between the transmitter and the other receiver
more stable.
One major application of having a longer lead-In Delay is
when you are Selectively Calling another radio via a
repeater station. long lead-In Delay helps to stabilise both
the communication link from your radio to the repeater
station and the communication link from the repeater to the
other radio.
To change the lead-In Delay of your radio:
1. Press the (i) for about 1.5 seconds. The lCD displays:
[
L-]
Page 31
UH-O57
~-~ ...-