Filter
Top Products
Create a Channel Scan List with Channel Lock-Out
Feature
You may have certain channels that you do not want to hear
every time you scan. These are channels that are busy in a
major portion of time, and the scanning stops at that
channel(s) often enough to interrupt the scan cycle. You
can Lock-out those channels so they are not scanned.
r
I
There are two ways to do this.
UP DOWN
1. Usingthe 0 or 0 switches, manually select the
uo
desired channel and press the 0 button. The locked-
out channel blinks.
2. While scanning, when the unit stops on the channel you
wish to lock-out because of its too much activity, simply
uo
press the 0 Key and it will be automatically removed
from the scan list. Scanning resumes.
To remove the lock-out condition from a channel, manually
uo
select the channel and press 0 button again. The channel
stops blinking.
UH-O57
Page 18