Filter
Top Products
~
When a call is received while TSQ Scanning, UH-057
follows the same response as receiving a call on a Tone
Squelch Channel. It differs only on the following.
1. If the call is not answered within the 20 second period,
TSQ Scanning resumes. CAL indicator remains on the
LCD.
To look for the channel where CALL is received:
UP
a. Cancel TSQ Scanning by pressing either the 0 or
DOWN
0 Key.
UP DOWN
b. Using the 0 or 0 Key, browse through the TSQ
Channels.
The CAL indicator marks the channel where the call is
received.
2. When answered, TSQ scanning is automatically
deactivated. The channel is removed from the Quiet
Operating Mode.
To deactivate TSQ Scanning:
UP DOWN
1. Press either the 0 or 0 Key. SCN indicator disap-
pears from the LCD and the unit returns to the Ch.annel
prior to accessing TSQ Scanning.
2. When a SELCALL is received, press the PIT Switch.
Note: The chance of receiving and decoding Selcall Call
effectively while TSQ Scanning can be increased in
many different ways. You can either lessen the
number of channels to be scanned to increase the
scanning speed, or change some of the SELCALL
Parameters (please see "Otherparameters" on page
30). BE SURE THAT EVERY MEMBER OF YOUR
GROUP USES THE SAME SET-UP. OTHERWISE,
YOU WILL LESSEN THE CHANCE OF SELEC-
TIVELY CALLING EACH OTHER.
J
UH-O57
Page 24