~-....
Operation
r
I
,
!
i
I
--11
RECEIVE
1. Turn the radio ON. Rotate the
ON/OFFVolume control
clockwise until you hearthe click. A channel number
should appear in the LCD Display.
UP DOWN
2. Press the 0 or 0 switch or use the Numeric Keypad
to select the desired channel.
3. Press the monitor switch (Auto-squelch turns OFF).
4. Rotate the ON/OFF Volume control to adjust the speaker
volume to a comfortable level.
5. Press the Monitor switch (Auto-squelch turns ON).
Direct Channel Keying
Allows you to directly select a channel usingthe Numeric
Keypad.
Example 1: Selecting CH5 directly
- Press <D then @ .
Example 2: Selecting CH25 directly
-Press <D, <D then @ .
Upon pressing the @ Key, the LCD display and the unit
channel setting changes to CH25.
Auto-Squelch
Automatically eliminates the unwanted "rushing" noisewhen
the unit is turned ON.
- press the Monitor Switch to set the Auto-squelch
feature ON or OFF
Note: Tolisten to weak signal transmissions, switch OFF
the Auto-squelch feature (Squelch is on minimum
level). .
Page 15
UH-O57