Filter
Top Products
[ 46 ] THE INTEGRATED ANSWERING DEVICE
6 When you finish, hang up to exit the system.
The answering system automatically returns to standby.
Remote room monitor
You can call your answering system from any touch-tone phone and monitor
sounds in the room where your base is installed.
1 Call your telephone number.
2 While the greeting message is playing, press # and your PIN code.
3 The answering system begins announcing the time and day.
4 Press # then 5 to stop the messages.
5 Press # then
*
. You hear sounds in the room where your phone is installed.
After 15 seconds, the answering system returns to the command waiting
mode.
6 Press # then
*
to monitor the room for another 15 seconds. Or select
another remote function. Or hang up to exit the system. The answering
system automatically returns to standby.
Turn on the answering machine remotely
If you have forgotten to turn on your answering machine, you can turn it on
remotely from any touch-tone telephone.
1 Call your telephone number.
2 Wait ten rings until the machine answers.
3 Press # and enter your PIN code within 2 seconds. The answering system
begins to announce the time and day.
4 Press # then 6 to turn the answering system on.
5 Hang up the phone and subsequent calls will be answered by the machine.
If you enter an incorrect
PIN code three times, an
error tone sounds and
the phone automatically
hangs up.
TRU548 ENG O/M 7/18/01 15:43 Page 46